ETS FMIC Intercooler for 2015-2021 WRX
The ETS FMIC (front mount intercooler) for 2015-2021 WRX is available in 3", 3.5", 4" and 5" core thickness and measures in at a massive 26" wide and 11.37" tall. Includes just the intercooler, piping is sold separately. This is the kit Kozmic Motorsports used to hit that first 9 second pass with the 2015 WRX platform.
Vehicle Fitment:
2015-2021 Subaru WRX
Includes:
(1) Intercooler
(1) Mounting Hardware
Shipping Times:
Most ETS products are built to order. Please allow 4-5 weeks for fabrication time. California residents, please add 1-2 weeks for delivery.
Features:
• Massive 26" wide intercooler core designed for maximum heat transfer and minimal pressure drop
• Core Size: 26" Wide, 11.37" Tall and 3", 3.5", 4" or 5" thick.
• Precision tig welded construction
• Lightweight end tanks design
• Hand ported inlet and outlet for optimal flow
• Silver Finish
• No Logo Stencil
Intercooler Piping:
The ETS FMIC Piping is sold separately.
More Info:
All ETS cores feature an offset and staggered internal and external fin pack. The external fin pack is dense for maximum heat transfer, where the internal fin pack is less dense for maximum flow and performance. The key is finding the perfect balance between the two, which is what we do per application.
It's common for customers to be drawn to cheaper alternatives. Unfortunately those intercoolers are cheap for a reason! Most cheap intercoolers utilize a straight through internal fin pack, which acts more like a tunnel than a splitter; This results is much higher/hotter intake air temps, which then leads to timing reduction, knock, mis-fires, detonation, etc.
The ETS 2015+ WRX Intercooler is designed to perform!
ETS starts by locating the inlets and outlets in the middle of the core, which allows for proper air distribution and flow throughout the core. Each inlet and outlet is hand ported to reduce turbulence and promote maximum flow. We've seen other manufacturers simply weld on a tube and not debur the inside, which creates excess turbulence and disrupts air flow through the core.
Quality Assurance:
• Every intercooler is pressure tested to 50 psi
• Every product is cleaned and inspected prior to shipment.
• Fins are protected/covered during shipment to prevent damage.
• Inlet and outlet tubes are sealed to prevent any packing material from entering the intercooler as well as keep debris out during install.
Discounts:
We are sorry, discount codes are not available with ETS products.
Vehicle Fitment:
2015-2021 Subaru WRX
Includes:
(1) Intercooler
(1) Mounting Hardware
Shipping Times:
Most ETS products are built to order. Please allow 4-5 weeks for fabrication time. California residents, please add 1-2 weeks for delivery.
Features:
• Massive 26" wide intercooler core designed for maximum heat transfer and minimal pressure drop
• Core Size: 26" Wide, 11.37" Tall and 3", 3.5", 4" or 5" thick.
• Precision tig welded construction
• Lightweight end tanks design
• Hand ported inlet and outlet for optimal flow
• Silver Finish
• No Logo Stencil
Intercooler Piping:
The ETS FMIC Piping is sold separately.
More Info:
All ETS cores feature an offset and staggered internal and external fin pack. The external fin pack is dense for maximum heat transfer, where the internal fin pack is less dense for maximum flow and performance. The key is finding the perfect balance between the two, which is what we do per application.
It's common for customers to be drawn to cheaper alternatives. Unfortunately those intercoolers are cheap for a reason! Most cheap intercoolers utilize a straight through internal fin pack, which acts more like a tunnel than a splitter; This results is much higher/hotter intake air temps, which then leads to timing reduction, knock, mis-fires, detonation, etc.
The ETS 2015+ WRX Intercooler is designed to perform!
ETS starts by locating the inlets and outlets in the middle of the core, which allows for proper air distribution and flow throughout the core. Each inlet and outlet is hand ported to reduce turbulence and promote maximum flow. We've seen other manufacturers simply weld on a tube and not debur the inside, which creates excess turbulence and disrupts air flow through the core.
Quality Assurance:
• Every intercooler is pressure tested to 50 psi
• Every product is cleaned and inspected prior to shipment.
• Fins are protected/covered during shipment to prevent damage.
• Inlet and outlet tubes are sealed to prevent any packing material from entering the intercooler as well as keep debris out during install.
Discounts:
We are sorry, discount codes are not available with ETS products.
See more ETS Products
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |