STM Evo 7/8/9 Oil Catch Can Trans Mount Sealed

STM Tuned Inc.

$499.00 
STM-EVO89-SLD1-5S

Quantity: 



We price match!

The V2 STM Sealed Engine Oil Catch Can for the 2001-2006 Evo 7/8/9 is designed to help keep vacuum on the crankcase at all times. By doing this, it will reduce the amount of oil that passes by your turbo and engine seals. Even more importantly, It will help your piston rings seal which will create more power with less blow by.

Vehicle Fitment:
2003-2006 Mitsubishi Lancer Evolution VIII & IX
• Requires an aluminum intake pipe.
• 10AN aluminum bung must be welded on to intake for install.
• This will not work with forward-facing kits that do not utilize an intake.
• Matching STM Vented Intake Pipe (HERE)
• Review the Single Port vs Dual Port configurations below.
• For JDM valve covers, you will need to purchase the STM JDM -10AN Rear Valve Cover Fitting separately.

More Info:
The can itself mounts to existing bolt-holes on your transmission (will vary between 5-speed and 6-speed), right below the slave cylinder. All fittings, line and hose are included and features an easy-access brass drain plug and a durable wrinkle black powdercoat finish.

One of the lines will vent to your intake pipe. This will require some DIY and welding service, or give us a call and we can get you a new pipe to match your set-up with the bung welded on.

Design:
The STM Sealed Catch Can is designed to remove the crankcase pressure which causes oil to push through turbo seals. (If you just upgraded your turbo and you're seeing smoke out of your exhaust, this is typically the cause of it.)
Please feel free to call us with any questions!

Install Notes:
• Requires an aluminum intake pipe
• 10AN aluminum bung must be welded on to install or use the STM Vented Intake Pipe (HERE)
• This will not work with forward-facing kits that do not utilize an intake
• The mounting tabs are different for 5-speed or 6-speed transmission. The 5-speed style is pictured. The 6-speed can is more narrow. See the images for which two transmission bolts are reused to mount the can.

Features:
• Mounts Cleanly to the Transmission, Under the Intake
• Tig-Welded Aluminum Construction
• Durable Wrinkle Black Powdercoat
• Mounts to Existing Bolt Holes
• High-Quality Hoses and Fittings
• STM Products are made in the USA!
• Lifetime Warranty on STM Parts to the original purchaser against manufacturing defects.

Shipping Times: 1-14 Days
Hand crafted and welded in New York, please give our fabricators time to assemble your parts!

Single Port Sealed Catchcan Includes:

(1) STM Baffled & Sealed Catch Can (Wrinkle Black)
(1) 5 Foot Section -10AN Braided Hose (11990)
(1) 2 Foot Section -6AN Braided Hose (11956)
(1) 2 Foot Section 6mm Silicone Vacuum Line
(2) -10AN 90° Swivel Fittings (21910)
(2) -10AN 45° Swivel Fitting (21410)
(1) -6AN 90° Swivel Fitting (21906)
(1) -6AN Straight Swivel Fitting (21006)
(1) -6AN Cap (10452)
(1) OEM Mitsubishi PCV Valve (MD152772)
(1) -6AN to 1/8" BPT Fitting
(1) STM -10AN Rear Valve Cover Fitting (USDM)
(1) STM -6AN Side Valve Cover Fitting
(1) -10AN Aluminum Weld-On Bung (STM-10ANMB-AL)
(1) 1/4" NPT Petcock









Dual Port Sealed Catchcan Includes:

(1) STM Baffled & Sealed Catch Can Wrinkle Black
(1) 5 Foot Section -10AN Braided Hose (11990)
(2) 2 Foot Section -6AN Braided Hose (11956)
(1) 2 Foot Section 6mm Silicone Vacuum Line
(2) -10AN 90° Swivel Fittings (21910)
(2) -10AN 45° Swivel Fitting (21410)
(2) -6AN 90° Swivel Fitting (21906)
(1) -6AN Straight Swivel Fitting (21006)
(1) -6AN 120° Swivel Fitting (21206)
(1) -6AN Block Fitting (VIB-16613)
(1) OEM Mitsubishi PCV Valve (MD152772)
(1) -6AN to 1/8" BPT Fitting
(1) STM -10AN Rear Valve Cover Fitting
(1) STM -6AN Side Valve Cover Fitting
(1) -10AN Aluminum Weld-On Bung (STM-10ANMB-AL)
(1) 1/4" NPT Petcock






See more STM Parts
See more STM Products
© All content is property of STM Tuned Inc

Customer Reviews

Based on 7 reviews
86%
(6)
14%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Justin Ruprecht (Petoskey, MI, US)
It's a pretty decent kit

The fit and finish is good and all. But for me personally, I had to buy some different AN fittings for it to work. For anyone wondering, to clear the radiator fan, I needed a 120° -10, then for the hose that goes to the stm intake, I needed a straight -10, and a 30° -10 fitting.

M
M.H. (Abilene, TX, US)
Amazing customer service

Always heard horror stories when it comes to STMs customer service and EVERY single time I’ve ever had any issues they sorted it instantly. In this scenario I was missing a fitting and they have gone out of their way to help me out with no pushback amazing company that I recommend products from every chance I get 10/10 for Mark from customer service specifically. Thanks again STM!

R
Rodell (North Las Vegas, NV, US)
Seal v2

Ordered this about 2 months ago. Install was straight forward, with no problems. Great customer service. I was missing an item in the kit and they were quick about sending that part. Great company.

C
Colby Anderson (Ashtabula, OH, US)
A cure for crankcase pressure

This catch can should be the only one you consider if you have an FP turbo. I ordered mine powedercoated gloss black, the finish and welds are excellent. The kit has everything you need to get it installed in a few hours. This catch can alleviated my engine blowing out the dipstick from excess pressure and will help keep my turbo happy as well. Thanks for making so many awesome parts for these cars!

Thanks for the kind words Colby, we appreciate your detailed review!

H
Harvey Gepielago (Las Vegas, NV, US)
V2 sealed catch can for evo 8/9

Great company to deal with... They got my v2 catch can to me 4 days before my dyno day!

Glad we could help! Thanks for the kind words Harvey.


WARNING:
Cancer and Reproductive Harm
www.p65warnings.ca.gov