STM Evo X Fuel Pressure Regulator Kit (FPRK)
The STM Evo X fuel pressure regulator kit includes all fittings, hardware and line to go from your factory style fuel rail outlet to the Fuelab regulator and back to the OEM return line. Includes the STM Evo fuel rail fitting for a direct fit to your factory style fuel rail and the STM Evo mounting bracket for an easy install of the regulator to the firewall. The mini Fuelab regulator is available in your choice of 6 colors and of course, the whole kit is E85 safe!
We also include the miscellaneous clamps, zipties and stainless bolts you'll need to save a trip to the hardware store. If you need PFTE tape, it's also available linked below. The included hoses are long enough any custom routing and can be trimmed to suit your setup.
Vehicle Fitment:
2008-2015 Mitsubishi Evolution X
Features:
• Includes every part needed to bolt-in and go!
• Direct fit mounting bracket
• Direct fit fuel rail fitting
• Soft nylon braided hose will not scratch like stainless
• Silicone-filled fuel pressure gauge
• Fuelab regulator in your choice of 6 colors
• 100% E85/Ethanol safe
Install Notes:
• Factory fuel pressure for the Evo X is 43.5 PSI
• The blue O-rings are extra.
• The brass NPT plug can be used if you want to plug off the gauge.
• The bracket included in the Fuelab box will not be needed.
• Thread Tape should be used on the gauge and the brass fitting.
• Do NOT use thread tape on AN fittings!
• We recommend: the PFTE Tape for the brass fitting or plug.
Mounting Location:
We will have installed photos up soon!
| Included Parts: | Used for Install: | |
| (1) FL-53501-* | Fuelab 6AN Mini Fuel Regulator | Mounted on firewall |
| (1) STM-6AN-7MM | STM 6AN Barb Fitting | To bottom port of regulator |
| (1) STM-EVOX-FRF | STM Fuel Rail Fitting with Hardware | To fuel rail |
| (1) STM-UNI-FPG | STM Liquid-Filled Fuel Pressure Gauge | To front of regulator |
| (1) STM-EVOX-FLMBRKT | (1) STM Evo Mini FPR Mounting Bracket | Mounts the regulator to firewall |
| (1) VIB-24902 | 6AN ORB 90° Hose End Fitting | To regulator |
| (1) VIB-24902 | 6AN ORB 90° Hose End Fitting | To fuel rail fitting |
| (1) VIB-10992 | 6AN Port Plug | To right side of regulator |
| (2) VIB-12233 | High Pressure Clamps 10-12mm | For push-on hose |
| (2') VIB-16324 | 2 Feet -4AN Push-On Hose | FPR bottom to factory hard line |
| (4') VIB-11956 | 4 Feet -6AN Nylon Hose | Between both 90° fittings |
| (4') FT-VB-012 | 4 Feet 3mm Silicone Vacuum Line | FPR to boost source |
| (2) FAS-63122 | Small 4" Zip Ties | For silicone vacuum line |
| (1) M6 Lock (FAS-ML630000A20000) | M6 Stainless Lock Washer | For the STM mounting bracket |
| (1) M6 Flat (MW6360000A20000) | M6 Stainless Flat Washer | For the STM mounting bracket |
| (1) M6 Nut (FAS-MN2550000A20000) | M6 Stainless Nut | For the STM mounting bracket |
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |