STM Lightweight Rear Drag Brake Kit for 2022 WRX
STM Rear Drag Brake Kits for the 2022 Subaru WRX allow you to ditch the weight of your big, heavy stock rotors and calipers and clears room to run 15" wheels and slicks for drag racing applications. Save 32-35 pounds of rotating mass!
Vehicle Fitment:
2022 Subaru WRX
• Deletes the E-Brake
More Info:
The STM brake kits include Wilwood calipers and your choice of standard rotor or the ultra lightweight scalloped rotor, custom STM aluminum mounting brackets, STM spacers, black anodized rotor hats, STM brake lines and all mounting hardware. The rotors will ship pre-assembled to the hats with safety wire as pictured.
This kit will also remove the rear parking brake for additional weight savings. Again, this is designed for drag cars only.
The scalloped rotor is 1.15 pounds lighter than the standard rotor and is recommended for cars that see more miles on the drag strip than on the street. The scalloped rotor is not a street rotor.
Installed pics coming soon!
• This brake set-up is specifically designed for drag racing
• This is not intended for constant, on/off braking as in road-racing or autocross
• Will clear most 15" wheels
Weight Savings:
Save 35.02 pounds with the Scalloped Kit
Save 32.72 pounds with the Standard Kit
STM Weights:
STM Rear Scalloped Kit (per side): 9.00 pounds
STM Rear Standard Kit (per side): 10.15 pounds
Rear Scalloped Rotor: 5.60 pounds
Rear Standard Rotor: 6.75 pounds
Rear Caliper: 3.20 pounds
2022 WRX Stock Weights: (per side)
Rear Rotor: 13.20
Rear Caliper: 6.30
Rear E-Brake: 6.30
Rear Brake Line: 0.31
STM Rear Brake Kit Contents:
(2) STM Rotor Hats (STM-00-SUBI-FBH)
(2) STM Caliper Brackets (STM-15+WRX-R)
(2) STM Spacers (STM-LC-075)
(1) STM Brake Lines (STM-02PLUS-WRX-FRTCL)
(2) Wilwood Rear Rotors (Standard 160-3202 or Scalloped 160-9772)
(2) Wilwood Rear Calipers (WIL-120-9688)
(2) Wilwood Street Brake Pads (150-9764K)
(2) Wilwood Hat Bolts (WIL-230-0150)
(4) M10x30 Bolts (FAS-1139619)
(4) M10 Washers (FAS-1140384)
IMPORTANT NOTES - For Drag Racing Only!
These brakes are designed for OFF ROAD USE ONLY and drag racing applications. They are NOT intended for consecutive, hard braking. These are not for road racing or autocross or daily street use. While these are also the same brakes we run on our STM 8 second cars, as with anything performance-oriented, please be sure to check and double-check every aspect for safety, EACH AND EVERY PASS! Please use your discretion and drive safely.
Vehicle Fitment:
2022 Subaru WRX
• Deletes the E-Brake
More Info:
The STM brake kits include Wilwood calipers and your choice of standard rotor or the ultra lightweight scalloped rotor, custom STM aluminum mounting brackets, STM spacers, black anodized rotor hats, STM brake lines and all mounting hardware. The rotors will ship pre-assembled to the hats with safety wire as pictured.
This kit will also remove the rear parking brake for additional weight savings. Again, this is designed for drag cars only.
The scalloped rotor is 1.15 pounds lighter than the standard rotor and is recommended for cars that see more miles on the drag strip than on the street. The scalloped rotor is not a street rotor.
Installed pics coming soon!
• This brake set-up is specifically designed for drag racing
• This is not intended for constant, on/off braking as in road-racing or autocross
• Will clear most 15" wheels
Weight Savings:
Save 35.02 pounds with the Scalloped Kit
Save 32.72 pounds with the Standard Kit
STM Weights:
STM Rear Scalloped Kit (per side): 9.00 pounds
STM Rear Standard Kit (per side): 10.15 pounds
Rear Scalloped Rotor: 5.60 pounds
Rear Standard Rotor: 6.75 pounds
Rear Caliper: 3.20 pounds
2022 WRX Stock Weights: (per side)
Rear Rotor: 13.20
Rear Caliper: 6.30
Rear E-Brake: 6.30
Rear Brake Line: 0.31
STM Rear Brake Kit Contents:
(2) STM Rotor Hats (STM-00-SUBI-FBH)
(2) STM Caliper Brackets (STM-15+WRX-R)
(2) STM Spacers (STM-LC-075)
(1) STM Brake Lines (STM-02PLUS-WRX-FRTCL)
(2) Wilwood Rear Rotors (Standard 160-3202 or Scalloped 160-9772)
(2) Wilwood Rear Calipers (WIL-120-9688)
(2) Wilwood Street Brake Pads (150-9764K)
(2) Wilwood Hat Bolts (WIL-230-0150)
(4) M10x30 Bolts (FAS-1139619)
(4) M10 Washers (FAS-1140384)
IMPORTANT NOTES - For Drag Racing Only!
These brakes are designed for OFF ROAD USE ONLY and drag racing applications. They are NOT intended for consecutive, hard braking. These are not for road racing or autocross or daily street use. While these are also the same brakes we run on our STM 8 second cars, as with anything performance-oriented, please be sure to check and double-check every aspect for safety, EACH AND EVERY PASS! Please use your discretion and drive safely.
See more STM Products
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |