Radium Fuel Pump Hanger for Evo 8/9

The Radium Engineering Evo 8/9 fuel pump hanger allows the use of 1 or 2 pumps in the stock fuel tank. The fuel pumps and socks are not included, but are pictured for install reference. Fits the Walbro/Ti F90000267, F90000274, F90000285 or the AEM 50-1220 pumps. Sold separately, linked below.

Vehicle Fitment:
2003-2006 Evolution VIII IX

Notes:
• Fuel pumps and socks are not included
• This hanger can house 1 or 2 fuel pumps in the factory Evo 8/9 fuel tank
• The 20-0345-00 hanger for Walbro/Ti is pictured

Recommended for Install: (Not Included)
• Hanger Plumbing Kit
• Filter Sock
• Fuel Pump Wiring Kit

Install Instructions:
Download PDF

More Info:
This system is compatible with the Walbro pumps Ti Automotive F90000267, F90000274 and F90000285 or the AEM 50-1220. Pumps are not included. The machined assembly drops-in the factory fuel tank replacing the OEM hold-down flange. A single 8AN male pump feed port and 6AN male return port simplify aftermarket -AN hose plumbing. However adapter fittings are also included to reuse the OEM fuel lines (if needed).

The custom designed stainless electrical studs easily handles the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM cover plate. Nylon acorn nuts are provided to prevent any accidental short circuits. Furthermore, the high quality in-tank wiring is insulated with chemically resistant PTFE.

One major issue with the OEM EVO 8-9 fuel pump hanger is the restrictive return port and Venturi jet pump. When using aftermarket high-flow fuel pumps, the OEM jet pump becomes too restrictive creating unwanted back pressure in the regulator return line causing excessive fuel rail pressure. The Radium fuel pump hanger includes a Venturi jet pump with a new integrated pressure-relief valve to minimize back pressure.

All returning fuel from the pressure regulator and crossover hose exit the jet pump keeping the OEM gas tank baffle full for starvation protection.

Single pump applications can reuse the OEM fuel pump controller wiring, but it is recommended to upgrade the OEM wiring as these high flow fuel pumps draw additional current requiring larger gauge wire.

Features:
• Anodized Aluminum Mounting Plate
• Anodized Aluminum Venturi Jet Pump with Multiple Orifices
• Anodized Aluminum 8AN Male Pump Outlet Fitting
• Anodized Aluminum 6AN Male FPR Inlet Fitting
• Anodized Aluminum Dual Pump and Fuel Sender Bracket
• Anodized Aluminum Pump Outlet Fittings
• Electrical Hardware for Fuel Pumps and OEM Sender
• Fluorosilicone Duckbill Return Valve
• Submersible Rubber Fuel Hose
• Stainless Steel Hardware and Clamps

Install Notes:
• Electrical hardware is included for the fuel pump(s) and OEM level sender.
• There will be enough components included to use 1 or 2 fuel pumps.
• Depending on the setup, some parts will simply not be used.

See more Radium Products