Radium Evo X Fuel Pump Hanger for GSS342/AEM (20-0311-00) *Discontinued*
The Radium Engineering Evo X fuel pump hanger can house one or two GSS342, AEM 50-1000 or 50-1200 fuel pumps in the stock fuel tank. The fuel pumps and socks are not included. Fuel pumps are sold separately, linked below.
*Discontinued*
As of June 2022, this item was discontinued by Radium. We have none remaining in stock.
• See more Evo X Fuel Pump Hangers
Vehicle Fitment:
• 2008-2015 Evolution X
Compatible Fuel Pumps (Not Included):
• Fits Walbro GSS342
• Fits AEM 50-1000
• Fits AEM 50-1200
Notes:
• Fuel pumps and socks are not included.
• This hanger can house 1 or 2 fuel pumps in the factory Evo X fuel tank.
Recommended for Install: (Not Included)
• Evo X Fuel Feed Kit
• Evo X Fuel Return Kit
• Filter Sock
• Fuel Pump Wiring Kit
Install Instructions:
Download PDF
Full Description:
The Radium Engineering fuel pump hanger allows the use of 1 or 2 aftermarket pumps in the stock Mitsubishi Evo X fuel tank. The machined assembly drops-in the factory fuel tank using the OEM hold-down flange. A single 8AN male pump feed port and 6AN male return port simplify aftermarket -AN hose plumbing. Electrical hardware is included for the fuel pump power, OEM level sender, and OEM temperature sensor.
The custom designed stainless electrical studs easily handles the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM cover plate. Nylon acorn nuts are provided to prevent any accidental short circuits. Furthermore, the high quality in-tank wiring is insulated with chemically resistant PTFE.
One major issue with the OEM EVO X fuel pump hanger is the restrictive return port and venturi jet pump. When using aftermarket high-flow fuel pumps, the OEM jet pump becomes too restrictive creating unwanted back pressure in the regulator return line causing excessive fuel rail pressure. The Radium fuel pump hanger includes a venturi jet pump with a new pressure-relief valve to minimize back pressure.
The kit also includes a 2-piece anodized aluminum collector box that sits at the bottom of the OEM fuel tank. This container is NOT a total solution to fuel starvation, but does improve the fuel supply around the pump(s) inlet. There are two 1" ball check valves incorporated on the front and rear of the box that serves as trap doors keeping the pump(s) supplied with fuel during aggressive driving. Furthermore, all returning fuel from the pressure regulator return and the crossover hose enter the collector box keeping it full. The collector box also permits a mounting solution for the OEM fuel level and fuel temperature sensors. Also included are 2 mating connectors for the sensors making the kit easily serviceable.
Single pump applications can reuse the OEM fuel pump controller wiring, but it is recommended to upgrade the OEM wiring as high flow fuel pumps draw additional current requiring larger gauge wire. Fuel pump wiring kits can be purchased HERE. Select qty1 for single pump applications and qty2 for dual pump applications.
Features:
• Anodized Aluminum Mounting Plate
• Anodized Aluminum Collector Box and Check Valves
• Anodized Aluminum Venturi Jet Pump with Multiple Orifices
• Anodized Aluminum 8AN Male Pump Outlet Fitting
• Anodized Aluminum 6AN Male FPR Inlet Fitting
• Anodized Aluminum Fuel Level and Temp Sensor Bracket
• Anodized Aluminum Dual Pump Cradle
• Electrical Hardware for Fuel Pumps and OEM Sensors
• Fluorosilicone Duckbill Return Valve
• Submersible Rubber Fuel Hose
• Stainless Steel Hardware and Clamps
• Fuel Pumps are not included
Install Notes:
• Electrical hardware is included for the fuel pump(s) and OEM level sender.
• There will be enough components included to use 1 or 2 fuel pumps.
• Depending on the setup, some parts will simply not be used.
*Discontinued*
As of June 2022, this item was discontinued by Radium. We have none remaining in stock.
• See more Evo X Fuel Pump Hangers
Vehicle Fitment:
• 2008-2015 Evolution X
Compatible Fuel Pumps (Not Included):
• Fits Walbro GSS342
• Fits AEM 50-1000
• Fits AEM 50-1200
Notes:
• Fuel pumps and socks are not included.
• This hanger can house 1 or 2 fuel pumps in the factory Evo X fuel tank.
Recommended for Install: (Not Included)
• Evo X Fuel Feed Kit
• Evo X Fuel Return Kit
• Filter Sock
• Fuel Pump Wiring Kit
Install Instructions:
Download PDF
Full Description:
The Radium Engineering fuel pump hanger allows the use of 1 or 2 aftermarket pumps in the stock Mitsubishi Evo X fuel tank. The machined assembly drops-in the factory fuel tank using the OEM hold-down flange. A single 8AN male pump feed port and 6AN male return port simplify aftermarket -AN hose plumbing. Electrical hardware is included for the fuel pump power, OEM level sender, and OEM temperature sensor.
The custom designed stainless electrical studs easily handles the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM cover plate. Nylon acorn nuts are provided to prevent any accidental short circuits. Furthermore, the high quality in-tank wiring is insulated with chemically resistant PTFE.
One major issue with the OEM EVO X fuel pump hanger is the restrictive return port and venturi jet pump. When using aftermarket high-flow fuel pumps, the OEM jet pump becomes too restrictive creating unwanted back pressure in the regulator return line causing excessive fuel rail pressure. The Radium fuel pump hanger includes a venturi jet pump with a new pressure-relief valve to minimize back pressure.
The kit also includes a 2-piece anodized aluminum collector box that sits at the bottom of the OEM fuel tank. This container is NOT a total solution to fuel starvation, but does improve the fuel supply around the pump(s) inlet. There are two 1" ball check valves incorporated on the front and rear of the box that serves as trap doors keeping the pump(s) supplied with fuel during aggressive driving. Furthermore, all returning fuel from the pressure regulator return and the crossover hose enter the collector box keeping it full. The collector box also permits a mounting solution for the OEM fuel level and fuel temperature sensors. Also included are 2 mating connectors for the sensors making the kit easily serviceable.
Single pump applications can reuse the OEM fuel pump controller wiring, but it is recommended to upgrade the OEM wiring as high flow fuel pumps draw additional current requiring larger gauge wire. Fuel pump wiring kits can be purchased HERE. Select qty1 for single pump applications and qty2 for dual pump applications.
Features:
• Anodized Aluminum Mounting Plate
• Anodized Aluminum Collector Box and Check Valves
• Anodized Aluminum Venturi Jet Pump with Multiple Orifices
• Anodized Aluminum 8AN Male Pump Outlet Fitting
• Anodized Aluminum 6AN Male FPR Inlet Fitting
• Anodized Aluminum Fuel Level and Temp Sensor Bracket
• Anodized Aluminum Dual Pump Cradle
• Electrical Hardware for Fuel Pumps and OEM Sensors
• Fluorosilicone Duckbill Return Valve
• Submersible Rubber Fuel Hose
• Stainless Steel Hardware and Clamps
• Fuel Pumps are not included
Install Notes:
• Electrical hardware is included for the fuel pump(s) and OEM level sender.
• There will be enough components included to use 1 or 2 fuel pumps.
• Depending on the setup, some parts will simply not be used.
See more Radium Products
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |