Radium Fuel Pulse Damper Inline Kit V2
Radium's inline fuel pulse damper kits are available with the green standard range or black extra range regulator. Each kit includes the basic install hardware, allowing you to simply choose which inlet/outlet fittings you need for your specific setup.
Vehicle Fitment:
Universal Application
Safe for use with all fuel types including alcohol blends such as E85.
DAMPERS CAN NOT BE USED WITH MECHANICAL FUEL PUMPS.
DAMPERS CAN NOT BE USED WITH DIRECT INJECTION.
| Part Number: | Regulator Style: | Base Pressure Requirement: | Anodize Color: |
| 20-0199 | FPD-R (Standard Range) | 40 - 70psi (static) | Green |
| 20-0200 | FPD-XR (Extra Range) | 40 - 105psi (static) | Black |
How to Choose Between FPD-R and FPD-XR:
Base pressure is the fuel pressure measured when the fuel pump is running WITHOUT a vacuum line connected to the regulator.
You should choose the damper that has a range that covers your base fuel pressure. If your base fuel pressure does not exceed 70psi, there is usually no advantage to using the extra range unit. The exception to this would be if your rising rate pressure exceeds 70psi, but never exceeds 105psi, and your falling rate under vacuum never moves under 40psi. In this scenario, the extra range damper would allow you to run without a vacuum line where the standard would require one.
Example 1: Mitsubishi EVO
OEM Base Static Fuel Pressure: 43.5psi
Boost Pressure: 30psi
Rising Rate Pressure Regulator? Yes
Can I use a FPD-R? Yes. Even though fuel pressure is 73.5psi at full boost and could be less than 40psi under vacuum, the FPD-R will work because the base static pressure was set within the 40-70psi requirement. However, the vacuum/boost reference line must be installed.
Can I use a FPD-XR? Yes. Also, the vacuum/boost reference line does not need to be installed since maximum fuel pressure does not exceed 105psi, but may need to be connected since it could fall under 40psi in vacuum.
Example 2: BMW E46 M3
OEM Base Static Fuel Pressure: 72.5psi
Boost Pressure: 20psi
Rising Rate Pressure Regulator? Yes
Can I use a FPD-R? No. Base static fuel pressure exceeds the 40-70psi requirement.
Can I use a FPD-XR? Yes. Also, the vacuum/boost reference line does not need to be installed since maximum fuel pressure does not exceed 105psi and won't fall under 40psi in vacuum.
Product Overview:
The opening and closing of fuel injectors creates pressure pulses in the fuel rail; this can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and can often help idle surge, especially with high flow injectors. Furthermore, a fuel pulse damper can help solve erratic lean air/fuel ratio spikes, commonly experienced as 'stumbling', that are difficult to tune out.
Fuel pulse dampers can be mounted at any angle, including upside down. There are many variables that dictate if a fuel system requires fuel pulse dampers. For instance, there are cases where multiple dampers are necessary. There are also other times when the fuel system benefits with a fuel pulse damper on the return line.
This product is safe for use with all fuel types including alcohol blends such as E85.
DAMPERS CAN NOT BE USED WITH MECHANICAL FUEL PUMPS.
DAMPERS CAN NOT BE USED WITH DIRECT INJECTION.
Mechanical fuel pumps and direct injection high pressure pumps create very intense pressure pulses that are and too strong for the diaphragms inside of pulse dampers. These pulses will rupture diaphragms in very short time.
Unique Design:
Along with having the flexibility of using common fittings, Radium Engineering FPD's use a vacuum/boost reference port which allows for proper fuel pulse damper performance even at elevated fuel pressures. This becomes essential for boosted systems that use a 1:1 rising rate fuel pressure regulator and in vacuum referenced regulators when fuel pressure falls under 40psi.
Specs & Features:
• 8AN ORB versions seal using a FKM O-ring
• The 3/8" NPT variations seal with the tapered pipe threads (sealant should be used)
• Because 20-0178 and 20-0179 use tapered threads (NPT), the vacuum port can be clocked to the desired location during tightening
• Even after tightening, the newest 8AN ORB dampers (20-0776 and 20-0777) will swivel. This allows the vacuum port to be clocked 360 degrees.
Purchase Includes:
• Anodized and laser engraved aluminum top
• Anodized aluminum body with male threads, 8AN ORB or 3/8" NPT
• Stainless steel hardware
• Rubber vacuum hose, 4mm ID
• Vacuum hose Y-fitting
Available Fittings:
• 8AN ORB to 6AN Male Fitting (14-0151)
• 8AN ORB to 8AN Male Fitting (14-0152)
• 8AN ORB to 10AN Male Fitting (14-0153)
• 8AN ORB to 8.5mm Barb Fitting (14-0294)
• 8AN ORB to 10mm Barb Fitting (14-0694)
• 8AN ORB to 5/16" SAE Male Fitting (14-0367)
• 8AN ORB to 3/8" SAE Male Fitting (14-0368)
• 8AN ORB Plug (14-0150)
Product Notes:
As of November 2026, the V2 kit part numbers replace the previous variations that used to include specific inlet/outlet fittings: 20-0199-01, 20-0199-06, 20-0199-08, 20-0199-10 and 20-0200-01, 20-0200-06, 20-0200-08, 20-0200-10. Now you simply buy the fittings to match your build.

![]() |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |

