Save 10% on STM Products with code STM10

Radium DMR Direct Mount Fuel Pressure Regulator

Radium

$142.45 
RAD-20-0223-00



The Direct Mount Regulator (DMR) is the perfect solution for simplifying a high-flow fuel injection system. The unique swivel inlet fitting adapts directly to the fuel rail eliminating external mounting and additional plumbing.

Vehicle Fitment:
Universal Product
Please review dimensions and sizes before purchase.

Install Instructions:
Download PDF

Options:
• Black or Green
• For 6AN ORB Fuel Rail
• For 8AN ORB Fuel Rail
• For OEM Fuel Rail with a 2-Bolt Flange (11mm Bore/39mm M6 Bolt Spacing)

Full Description:
The Direct Mount Regulator (DMR) is the perfect solution for simplifying a high-flow fuel injection system. It's unique swivel inlet fitting adapts directly to the fuel rail eliminating external mounting and additional plumbing.

Two interchangeable orifices are included with calculated flow diameters to match the fuel pump flow to the regulator. Furthermore, this added precision will resist diaphragm flutter and optimize pressure stability. See the installation instructions for more details.

Either of the lower two opposing -6AN ORB ports can be used for the return line. These ports CANNOT be used for fuel pressure gauge or sensor as these are low pressure ports. Using the included fittings, simply install the 6AN male into the port that points in the ideal direction and install the plug into the remaining port. Fuel pressure is dialed in using the preload set screw on top.

The 1:1 vacuum reference high flow design has been tested to regulate over 1,400 liters per hour (see MORE DETAILS tab). Furthermore, with the addition of interchangeable return orifices, the DMR can be used most any horsepower level. Compatible with all gasoline and ethanol blends of fuel.

Includes:
• Fuel Pressure Regulator (Black or Green)
• Inlet Adapter Fitting
• 6AN ORB to 6AN Male (for return line)
• 6AN ORB Plug
• Interchangeable Return Orifices
• Stainless Steel Hardware
• FKM Viton O-rings


For 6AN ORB Fuel Rail (20-0393)
This should be used with aftermarket fuel rails that use 6AN ORB (9/16-18 O-ring boss) threaded ports.
  • This 6AN ORB inlet port is NOT compatible with a 6AN hose end. It MUST thread into a female 6AN ORB port.
  • This variation is NOT compatible with Radium fuel rails which use 8AN ORB threads.

For 8AN ORB Fuel Rail (20-0223)
This can be used with aftermarket fuel rails that use 8AN ORB (3/4-16) threaded ports. All Radium Engineering Fuel Rails use 8AN ORB ports.
  • This 8AN ORB inlet port is NOT compatible with an 8AN hose end.
  • Currently all Radium Engineering fuel rails are compatible with this variation.

For OEM Fuel Rails with a 2-Bolt Flange (20-0418)
This variation can be used with some OEM fuel rails to replace the factory regulator. The included adapter mates to an 11mm bore and M6 bolt holes that are symmetrically spaced 39mm apart.

This style is common to the following engines:
• Toyota 2RZ-FE
• Toyota 3RZ-FE
• Toyota 4E-FTE
• Toyota 4A-GZE
• Toyota 4A-GE
• Toyota 4A-GELU
• Toyota 2JZ-GTE (not compatible with OEM intake manifold/throttle body)
• Saab 9-2X Aero 2.0L
• Subaru EJ20 GDA WRX
• Mazda MX-5 BP

While the DMR will properly secure to the these OEM fuel rails, compatibility has NOT been verified when installed with the intake manifold on the engine.
In some cases, there will be an interference preventing the use of the DMR. As an example, this adapter will fit onto the Mitsubishi Evo X 4B11T fuel rail, but it interferes with the MIVEC solenoid. Reference the dimensions in the photos to determine if the DMR can physically reside in your specific application.


© All content is property of STM Tuned Inc



© All images are property of STM Tuned Inc


STM Boost Reward Points Earn 1% back on all website purchases! Sign up today!

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

WARNING:
Cancer and Reproductive Harm
www.p65warnings.ca.gov