Radium Catch Can Kit (VTA LH Strut Mount) for Evo 8/9 (20-0182) *Discontinued*
This Radium Evo 8/9 VTA Catch Can Kit vents to atmosphere and intended to be used by itself as the only crankcase vent point. It replaces the stock PCV valve with a high flowing -10AN press-in valve cover fitting and 5/8" ID hose and allows the gasses to vent through the catch can to the atmosphere. Installs on the LH strut tower by the battery.
*Discontinued*
As of June 2022, this part has been discontinued by Radium. We have none remaining in stock, but we do offer many other options:
• See more Evo Catch Cans
Vehicle Fitment:
2003-2006 Evolution VIII IX
Install Instructions:
Download PDF
Suggested for Install:
Petcock Drain Kit
(Sold Separately - You'll need one for each can.)
More Details:
An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance.
The Radium 20-0182 Vent-To-Atmosphere Catch Can Kit is an open system used for high flowing, high horsepower applications. Some loosely built race engines operate with a large amount of boost pressure and the OEM hoses can become too restrictive from excessive blow by.
This VTA kit is intended to be used by itself as the only crankcase vent point. It replaces the stock PCV valve with a high flowing -10AN press-in valve cover fitting and 5/8" ID hose and allows the gasses to vent through the catch can to the atmosphere. This kit installs on the LH strut tower by the battery.
Because this kit mounts the catch can behind the battery, there is a chance that there might not be enough room for the included breather filter if a large battery is used. The small vent port at the end of the valve cover is plugged and not used.
The OEM valve cover is magnesium and cannot not be welded. Instead, the included -10AN male press-in fitting replaces the large PCV valve bushing.
Venting to atmosphere does not recirculate crankcase gasses back through the engine and is intended for race vehicles dealing with a large amount of blow-by gasses.
Includes:
(1) Billet Oil Catch Can with Integrated Condenser and Dipstick
(1) Laser Cut Powder Coated LH Mounting Bracket
(1) -10AN (5/8") Black PCV Hose
(2) Radium -10AN Hose Ends 90° Push-Lok Hose End
(1) Radium -10AN Hose End 90° Push-Lok Hose End
(1) Radium Barb Fitting With Air Filter Breather
(1) Radium -10AN Male Valve Cover Press-In Fitting
(3) Vacuum Caps for 3/8" Barbs
(1) Stainless Steel Mounting Hardware
*Discontinued*
As of June 2022, this part has been discontinued by Radium. We have none remaining in stock, but we do offer many other options:
• See more Evo Catch Cans
Vehicle Fitment:
2003-2006 Evolution VIII IX
Install Instructions:
Download PDF
Suggested for Install:
Petcock Drain Kit
(Sold Separately - You'll need one for each can.)
More Details:
An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance.
The Radium 20-0182 Vent-To-Atmosphere Catch Can Kit is an open system used for high flowing, high horsepower applications. Some loosely built race engines operate with a large amount of boost pressure and the OEM hoses can become too restrictive from excessive blow by.
This VTA kit is intended to be used by itself as the only crankcase vent point. It replaces the stock PCV valve with a high flowing -10AN press-in valve cover fitting and 5/8" ID hose and allows the gasses to vent through the catch can to the atmosphere. This kit installs on the LH strut tower by the battery.
Because this kit mounts the catch can behind the battery, there is a chance that there might not be enough room for the included breather filter if a large battery is used. The small vent port at the end of the valve cover is plugged and not used.
The OEM valve cover is magnesium and cannot not be welded. Instead, the included -10AN male press-in fitting replaces the large PCV valve bushing.
Venting to atmosphere does not recirculate crankcase gasses back through the engine and is intended for race vehicles dealing with a large amount of blow-by gasses.
Includes:
(1) Billet Oil Catch Can with Integrated Condenser and Dipstick
(1) Laser Cut Powder Coated LH Mounting Bracket
(1) -10AN (5/8") Black PCV Hose
(2) Radium -10AN Hose Ends 90° Push-Lok Hose End
(1) Radium -10AN Hose End 90° Push-Lok Hose End
(1) Radium Barb Fitting With Air Filter Breather
(1) Radium -10AN Male Valve Cover Press-In Fitting
(3) Vacuum Caps for 3/8" Barbs
(1) Stainless Steel Mounting Hardware
See more Radium Products
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |