Radium Catch Can Kit (PCV Vent RH Mount) for FT86 BRZ FRS 86 (20-0101) *Discontinued*



More info below

The Radium PCV Vent Catch Can Kit for BRZ, FRS and 86 mounts on the right side of the engine bay to existing bolt holes. No modification of the vehicle is necessary. This kit does NOT vent to atmosphere (VTA), and is emissions and track legal.

As of June 2022, this part has been discontinued by Radium. We have none remaining in stock. Part number 20-0101.
See more BRZ Parts

Vehicle Fitment:
• 2012-2018+ Subaru BRZ
• 2013-2016 Scion FR-S
• 2012+ Toyota 86
• Brake clearancing is necessary on RHD

Install Instructions:
Download PDF

Suggested for Install:
Petcock Drain Kit

Full Description:
An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance.

• Effectively raises the octane and increased engine performance from cleaner inlet air
• Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc.
• Excessive oil collection can be an indicator of a damaged engine.
• Lowers hydrocarbon emissions

• Capacity: 6 fluid ounces
• Height (without fittings): 5 inches
• Outside Diameter: 2.45 inches

Single RH PCV Vent Catch Can Details:
The 20-0101 PCV Valve kit mounts on the right side of the engine bay. This catch can runs inline with the 3/8" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted.

Radium engineers have strategically located the catch cans for compatibility with both Right Hand Drive (RHD) and Left Hand Drive (LHD) "86" model variations. Some brake clearancing is necessary on RHD installations. Both of these kits are also compatible with all current aftermarket forced induction kits. For mounting, the kits use factory bosses and holes in the vehicle. No cutting, drilling or permanent modification to the vehicle is required.

This kit does NOT vent to atmosphere (VTA), thus is emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors into the cabin.

• Radium billet oil catch can with integrated condenser and dipstick
• Radium laser cut powder coated "86" specific mounting bracket
• Anodized aluminum banjo bolt, -8AN hose ends, and adapter fittings
• Enough hose to mate to custom applications
• Stainless steel mounting hardware
• Installation instructions
See more Radium Products
See more Radium Products
© All content is property of STM Tuned Inc

Customer Reviews

No reviews yet

Cancer and Reproductive Harm