Omni Power MAP Sensor for Honda B/D/H/F Series
Omni Power MAP sensors for Honda/Acura B, D, H and F series are available in 2.5, 3, 4 and 5 Bar. These sensors have a black case and each is clearly labeled 3BAR, 4BAR or 5BAR. This is not a stock replacement sensor, you will need to have your car tuned.
Tune Required:
These MAP sensors will require a tune. This is not a stock replacement sensor.
Vehicle Fitment:
Honda Civic 88-00 (All)
Honda Accord 94-02 (All including V6)
Honda CRV 97-01 (All)
Honda Del Sol 93-97 (All)
Honda Odyssey 95-01 (All)
Honda Prelude 92-01 (All)
Honda S2000 00-05 (All)
Acura CL 97-99 (All)
Acura CL 01-03 (V6 Only)
Acura TL 99-03 (All)
Acura Integra 90-01 (All)
Acura Integra 90-93 will require 94+ throttle body)
Includes:
(1) Sensor
More from Omni Power:
Omni Power USA MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.
Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32°F to 180°F through out its range of scale.
With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. Omni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi (7 bar 1-80+ psi,) while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.
Features:
• Cases are designed to withstand in excess of 130 PSI without leaking
• -40 to 260° Fahrenheit temperature operating range
• Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market)
• Automatic temperature compensation
• True linear scaling for perfect drivability at all boost and vacuum levels
• Compatible with all aftermarket engine management systems
• Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes
• Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors
• Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor
• Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping
Tune Required:
These MAP sensors will require a tune. This is not a stock replacement sensor.
Vehicle Fitment:
Honda Civic 88-00 (All)
Honda Accord 94-02 (All including V6)
Honda CRV 97-01 (All)
Honda Del Sol 93-97 (All)
Honda Odyssey 95-01 (All)
Honda Prelude 92-01 (All)
Honda S2000 00-05 (All)
Acura CL 97-99 (All)
Acura CL 01-03 (V6 Only)
Acura TL 99-03 (All)
Acura Integra 90-01 (All)
Acura Integra 90-93 will require 94+ throttle body)
Includes:
(1) Sensor
| Part Numbers: | Sensor: |
| MAP-BDHF-2.5BR MAP-B-2.5BR |
2.5 Bar MAP Sensor |
| MAP-BDHF-3BR MAP-B-3BR |
3 Bar MAP Sensor |
| MAP-BDHF-4BR MAP-B-4BR |
4 Bar MAP Sensor |
| MAP-BDHF-5BR MAP-B-5BR |
5 Bar MAP Sensor |
Omni Power USA MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.
Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32°F to 180°F through out its range of scale.
With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. Omni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi (7 bar 1-80+ psi,) while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.
Features:
• Cases are designed to withstand in excess of 130 PSI without leaking
• -40 to 260° Fahrenheit temperature operating range
• Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market)
• Automatic temperature compensation
• True linear scaling for perfect drivability at all boost and vacuum levels
• Compatible with all aftermarket engine management systems
• Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes
• Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors
• Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor
• Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |