GSC Billet Cams for RB26DETT Skyline R32 R33 R34 GTR
GSC Power-Division billet cams for RB26DETT Skyline R32 R33 R34 GTR are available in the S1/S2 and R1/R1.5/R2/R3 specs. The S1/S2 versions don't require any modifications to the head to install. Please review the table below and consult your engine builder if necessary. Sold as the pair, purchase includes both intake and exhaust cams.
Vehicle Fitment:
Nissan RB26DETT
Skyline R32 R33 R34 GTR
Purchase Includes:
(2) Camshafts
Vehicle Fitment:
Nissan RB26DETT
Skyline R32 R33 R34 GTR
Purchase Includes:
(2) Camshafts
| ADV Duration | Duration @ 0.040" | Peak Lift | Center Line | ||
| S1 Cams 7041S1 |
Intake | 268° | 230° | 9.50mm | 110° |
| Exhaust | 270° | 230° | 9.55mm | 115° | |
| *NOTE: No head modifications required | |||||
| S2 Cams 7041S2 |
Intake | 272° | 238° | 9.70mm | 110° |
| Exhaust | 276° | 242° | 9.75mm | 115° | |
| *NOTE: No head modifications required | |||||
| R1 Cams 7041R1 |
Intake | 272° | 238° | 10.50mm | 110° |
| Exhaust | 276° | 242° | 10.55mm | 115° | |
| *NOTE: Reduced base circle = 30.5mm (Requires head mods) | |||||
| R1.5 Cams 7041R15 |
Intake | 276° | 244° | 11.00mm | 110° |
| Exhaust | 278° | 248° | 11.00mm | 115° | |
| *NOTE: Reduced base circle = 30.5mm (Requires head mods) | |||||
| R2 Cams 7041R2 |
Intake | 282° | 248° | 11.30mm | 110° |
| Exhaust | 282° | 252° | 11.35mm | 118° | |
| *NOTE: Reduced base circle = 30.5mm (Requires head mods) | |||||
| R3 Cams 7041R3 |
Intake | 291° | 256° | 11.40mm | 110° |
| Exhaust | 294° | 260° | 11.50mm | 118° | |
| *NOTE: Reduced base circle = 30.5mm (Requires head mods) | |||||
See more GSC Products
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |