FP XR Blue 73HTZ Ball Bearing Turbo for EJ WRX/STi
The Forced Performance FP XR Red 79HTZ ball bearing turbo for the EJ Subaru WRX/STi features the 73mm HTZ compressor section with your choice of 58MM stock appearing cover or 84MM Flow Advancement Port compressor cover coupled to the 8cm2 turbine section. This combo produces the best balance of spool and power available on this platform. The XR Blue flows 57LB a minute and is capable of producing upwards of 475WHP.
Vehicle Fitment:
2002-2014 Subaru WRX EJ
2004-2020 Subaru WRX EJ
More Info:
Internal gate Subaru turbos are available with either the stock canister style 15 PSI actuator, or you can upgrade to an 18 PSI TiAL MVI actuator. Internal gate Subaru turbos are available with either the stock canister style 15 PSI actuator, or you can upgrade to an 18 PSI TiAL MVI actuator.
The FP Blue utilizes a XONA Ball Bearing CHRA for increased durability in situations where you might see low oil flow such as road racing or autocross applications. Subaru XR turbos have an M12x1.25 oil inlet in the bearing housing, allowing use of the FP Subaru Oil Feed line.
Shipping Time: (8-10 Weeks)
FP Turbos are built to your spec. These are not in stock. Typical wait time has been 8-10 weeks.
Subaru Install Notes:
• 84mm FAP Cover requires TGV Delete to fit in stock location.
• (PDF) Oil Feed Line Install Instructions.
• (PDF) Oil Line PSA.
Vehicle Fitment:
2002-2014 Subaru WRX EJ
2004-2020 Subaru WRX EJ
More Info:
Internal gate Subaru turbos are available with either the stock canister style 15 PSI actuator, or you can upgrade to an 18 PSI TiAL MVI actuator. Internal gate Subaru turbos are available with either the stock canister style 15 PSI actuator, or you can upgrade to an 18 PSI TiAL MVI actuator.
The FP Blue utilizes a XONA Ball Bearing CHRA for increased durability in situations where you might see low oil flow such as road racing or autocross applications. Subaru XR turbos have an M12x1.25 oil inlet in the bearing housing, allowing use of the FP Subaru Oil Feed line.
FP Blue 73HTZ Ball Bearing Turbo:
| Compressor Wheel | 73HTZ |
| Flow Rating | 57LB per minute |
| CW Measurements | 52.6MM Inducer / 73MM Exducer |
| TW Measurements | 60.8MM Inducer / 54MM Exducer |
| Compressor Housing | 84MM FAP Cover or 58MM Stock Appearing Cover |
| Turbine Housing | FP 8CM Subaru Turbine Housing |
| CHRA | Xona Rotor Ball Bearing |
| Oil Line | Included |
| Gasket Set | Included |
| FP Part Numbers | 2027000, 2027002, 2027004, 2027005, 2027006 |
FP Turbos are built to your spec. These are not in stock. Typical wait time has been 8-10 weeks.
Subaru Install Notes:
• 84mm FAP Cover requires TGV Delete to fit in stock location.
• (PDF) Oil Feed Line Install Instructions.
• (PDF) Oil Line PSA.
Ceramic Turbine Housing Coating (+$100): |
||
 |
||
| You can have your exhaust housing treated with a black or silver ceramic coating to help keep the heat in, keeping your engine bay cooler and it will look amazing! | ||
See more Forced Performance Products
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |