EXEDY Twin Carbon Clutch Kit for Evo 4-9 (MM022HBMC) *Discontinued*

Discontinued

$0.00 
EXE-MM022HBMC

More info below

The EXEDY Twin Carbon Clutch Kit for the Evo 4-9 models has a Hyper pressure plate and features the lightweight carbon discs. The carbon discs can last nearly twice as long as metallic discs and put off far less heat. Carbon clutches do need to be "warmed up" prior to launching and racing and are not recommended for street use.

*Discontinued*
We are sorry, this clutch was discontinued by Exedy in February 2021. We have none remaining in stock.
See more Clutch Kits

Vehicle Fitment:
• 2001-2006 CT9A Evolution 7/8/9
• 1996-2001 CP9A CN9A Evo 4/5/6

Why do I need a twin plate clutch?
Multi plate clutch kits (Twin & Triple Disc) simply put have more than one clutch disc. The stock clutch comes with one disc and by having two or three discs, you essentially double or triple the surface area to be clamped. If you are like most Evo owners, you have probably doubled or tripled your power... so you need to compensate with a more powerful clutch. There will also be intermediate plates between the discs and especially with the Triple kits, when you push in the clutch pedal, you'll hear those plates rattling around free. That's totally normal and fun to mess with your friends.

Why do I need a carbon disc?
The carbon discs are super lightweight. Lighter means less rotating mass, less stress on your car. The carbon discs can last nearly twice as long as metallic discs and put off far less heat. Carbon clutches do need to be "warmed up" prior to launching and racing and are not recommended for street use.

Features:
• Drag, Road and Rally
• Hyper Flywheel
• Purple Anodized Forged Aluminum Clutch Cover
• Pull-Type Design
• Carbon Discs
• Rated for 600 WHP

MM022HBMC Twin Carbon Evo 4-9 Clutch Kit

Notes Hyper Twin Carbon-R Clutch
Rigid Disc
Pull Type Cover
Clamp Load 2922
Disc Diameter (Inches) 7.9
Disc Diameter (Millimeters) 200
Kit Contents CM13H, PP09, IM05, DP01, SH07, DB02, FM23, BS05, PR02and Alignment Tool
Spline Count 23
Spline Size (Inches) 1-1/16
Spline Size (Millimeters) 26.2
Torque Capacity (ft/lbs.) 447

Completely Rebuildable!
Check the link below, we have all the options you'll need when it comes time to rebuild. You can even convert to a triple disc if you're making more power!

Install Notes:
• Flywheel to Crank Bolt (ft-lb): 99
• Pressure Plate Assembly to Flywheel (ft-lb): 23

Need rebuild parts?
EXEDY Clutch Rebuild Parts

Exedy Clutch Rebuild Parts


Buy Exedy Clutch at STM!
See more Exedy Clutch Parts
© All content is property of STM Tuned Inc

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

WARNING:
Cancer and Reproductive Harm
www.p65warnings.ca.gov