EBC Yellowstuff Brake Pads for Audi R8/ Huracan (Iron Rotors)

EBC Yellowstuff brake pads for Audi R8 and Lamborghini Huracan models with iron rotors. The Yellow ceramic pads are designed where great stopping power is your goal on fast street use. Features the "Brake-In" surface coating for instant safe braking after install. Sold as a set for front or rear. Please confirm your options in the purchase menu.

Vehicle Fitment:
2017-2023 Audi R8
2015-2024 Lamborghini Huracan
Note:
• For use with iron rotors only
• Not for carbon ceramic rotors

Specs:
• Flagship top selling high friction brake pad for improved braking – UK made and a very high-end pad
• Suitable for Fast streetcars, trucks and SUVs wherever a decent brake power upgrade is required.
• Super quiet smooth braking under all conditions, fully shimmed slotted and chamfered construction
• Excellent cold bite coupled with high-temperature fade resistance
• Progressive braking with unparalleled pedal feel
• Drastically reduced stopping distances compared to OE
• ECE R 90 safety approved for most cars
• Combine aramid fiber with ceramic particle enhanced premium brake material
• Features red "Brake-In" surface coating for instant safe braking after install
• Made with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond

Yellowstuff Performance:
Low Dust: 8/10
Cold Bite: 7/10
Average Mu: 6/10
Fade Resistance (After Bedded): 6.5/10
Low Noise: 10/10
Bed in Speed: 5/10
Wear Life: 6/10

Pictured:
Images are for reference.

More Info:
High-efficiency performance pad for high friction and improved stopping power.

Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.

EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.

Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV. Yellowstuff is especially appreciated on Trucks for towing and heavy loads and where wheel and tire oversize upgrades have been fitted. In trackday/drift/hillclimb races where earlier Yellow blends were suggested, although track capable, is no longer recommended for track use on most cars due to its long bed-in process. BlueStuff is now our recommended entry-level race pad for all vehicles, which as a track hybrid is still great on the street and even better on track. But if you are to use Yellowstuff on the track, follow the below Fade procedures and remember that even beyond Bluestuff we have our new RP range and the fantastic SR series – both full race pads.

Bed-In Procedure:
A high friction pad that works from cold and self seats after installation due to its applied brake-in surface coating. Although the new Yellow grade WILL work fine under shorter duration track, trackday (lapping) use on lighter cars or drifting, it does take longer to bed in, and if track driving is your main purpose, choose Bluestuff.

• Fast Street use Pre Bed Fade 1 – drive 50 to 100 miles on Public road/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.

Yellowstuff, although track-capable, is no longer recommended for track use on most cars due to its long bed in the process. BlueStuff is now our recommended entry-level race pad for all vehicles, which as a track hybrid is still great on the street and even better on track. But if you are to use Yellowstuff on the track, follow the below Fade procedures;

• FADE 2 – After the basic street pre-bed above is performed on the road or at the track if installed there …..Perform 10 medium pressure snubs at the track from 80-20mph leaving 300 meters between each snub (approx 0.4g decel) Allow pads to cool for 15 minutes minimum after coasting to the pits allowing brakes to cool a little.

• FADE 3 – Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. We advise using disc heat paint to ensure green fade is avoided, continue reading below for more details

See more EBC Brakes