Fore Innovations Triple Pump Module - Nissan R35 GTR
Vehicle Fitment:
Nissan R35 GT-R
Description:
The Fore Innovations R35 GT-R Triple Pump Module supports over 1600 all wheel horsepower and is compatible with all gas, E85 and race fuels. Retains OEM level sender, temperature sensor, and transfer function. Includes three TI Auto F90000274 fuel pumps and the FC2 Controller with 6 gauge wiring. This will require aftermarket fuel feed and return lines.
Features:
• Supports over 1600 all wheel horsepower
• Requires aftermarket fuel feed and return lines
• E85 and race fuel compatible (see pump manufacturer recommendations on fuel compatibility)
• Retains OEM level sender, temperature sensor, and transfer function
• O-ring pump seal eliminates in-tank fuel hose to completely eliminate failures in E85 and race gas applications
• High current hermetic wire seal completely eliminates the possibility of fuel smells and leaks
• 12 gauge power wires ensure maximum pump performance
• Polymer pump body support minimizes pump noise and eliminates electrolysis
• Transfers without restrictor orifice on return discharge, ensuring accurate fuel pressure under any output or consumption conditions
Includes:
Triple Pump Module
TI Auto F90000274 Fuel Pumps (x3)
FC2 Controller with 6 Gauge Wiring
Power Wires
Install Notes:
Requires aftermarket fuel feed and return lines
Must install external 10 micron filtration, see the Fore Level 1 system for a basic system that includes filtration and uses OEM rails/lines/regulator
FC2 Controller to run both pumps full time (not recommended with 320+ lph pumps due to fuel heating)
OEM transfer function is retained (which continuously transfers fuel to the pump side) but our module eliminates the restrictive "basket" in the OEM fuel pump assembly.
Recommended 1/2 tank minimum for track use.
Images are for representation and will vary slightly by options.
Discounts:
We are sorry, but discount codes are not available with this product.
Nissan R35 GT-R
Description:
The Fore Innovations R35 GT-R Triple Pump Module supports over 1600 all wheel horsepower and is compatible with all gas, E85 and race fuels. Retains OEM level sender, temperature sensor, and transfer function. Includes three TI Auto F90000274 fuel pumps and the FC2 Controller with 6 gauge wiring. This will require aftermarket fuel feed and return lines.
Features:
• Supports over 1600 all wheel horsepower
• Requires aftermarket fuel feed and return lines
• E85 and race fuel compatible (see pump manufacturer recommendations on fuel compatibility)
• Retains OEM level sender, temperature sensor, and transfer function
• O-ring pump seal eliminates in-tank fuel hose to completely eliminate failures in E85 and race gas applications
• High current hermetic wire seal completely eliminates the possibility of fuel smells and leaks
• 12 gauge power wires ensure maximum pump performance
• Polymer pump body support minimizes pump noise and eliminates electrolysis
• Transfers without restrictor orifice on return discharge, ensuring accurate fuel pressure under any output or consumption conditions
Includes:
Triple Pump Module
TI Auto F90000274 Fuel Pumps (x3)
FC2 Controller with 6 Gauge Wiring
Power Wires
Install Notes:
Requires aftermarket fuel feed and return lines
Must install external 10 micron filtration, see the Fore Level 1 system for a basic system that includes filtration and uses OEM rails/lines/regulator
FC2 Controller to run both pumps full time (not recommended with 320+ lph pumps due to fuel heating)
OEM transfer function is retained (which continuously transfers fuel to the pump side) but our module eliminates the restrictive "basket" in the OEM fuel pump assembly.
Recommended 1/2 tank minimum for track use.
Images are for representation and will vary slightly by options.
Discounts:
We are sorry, but discount codes are not available with this product.
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |