Wilwood Dynapro Front Big Brake Kit for 2G DSM
Wilwood Dynapro big front brake kit for 2G DSM is available with red or black calipers and your choice of standard or slotted/drilled black rotors. Please note, you will also need the brake lines linked below which are sold separately.
Vehicle Fitment:
• 1995-1999 Eclipse GST/GSX
• 1995-1998 Talon TSi
Required for Install:
Wilwood 2G DSM Front Brake Lines (220-8293) (sold separately)
Brake Kit Installation:
PDF Install Instructions
Quick Specs:
• 15" minimum wheel diameter required
• This brake kit may fit 15-inch wheels. *Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel
• Rotor Diameter 12.19"
• Rotor Thickness 0.81"
• 4 Piston Calipers
• BP-10 Brake Pads 150-8946
Included/Replacement Part Numbers:
All parts of the brake kits are available for maintenance or replacement.
• Caliper Mounting Brackets (250-8321)
• BP-10 Brake Pads (150-8946)
• Bolt, 7/16-20 x 1.25" Hex Head (230-9897)
• Washer, .453" I.D. x .750" O.D. x .063" Thick (240-11101)
• Shim, .016" Thick (240-5680)
• Rotor Hat (170-8320)
• Anti-Squeal Shims (300-12177)
• Bolt, 5/16-18 x 1.00" Long, Button Head Torx (230-11935)
• Nut, 3/8-24 Self-Locking, 6 Point (230-16550)
• Washer, .391" I.D. x .625" O.D. x .063" Thick (240-10190)
• Shim, .016" Thick (240-10306)
• Spacer, .425" Long (300-7352)
• Stud, 3/8-16 x 3/8-24 x 3.15" Long (pre-installed in bracket) (230-9079)
• Calipers (see below)
• Rotors (see below)
Brake Kit: | Calipers: | Rotors: |
140-8292-DR | Red LH/RH: 120-14706-RD |
Drill/Slot Black Electro Coat LH: 160-7104-BK RH: 160-7103-BK |
140-8292-R | Red LH/RH: 120-14706-RD |
Standard LH/RH: 160-5843 |
140-8292-D | Black LH/RH: 120-14706-BK |
Drill/Slot Black Electro Coat LH: 160-7104-BK RH: 160-7103-BK |
140-8292 | Black LH/RH: 120-14706-BK |
Standard LH/RH: 160-5843 |
LH vs RH?
Left Hand and Right Hand is determined by driver position. From the driver seat, which side is it on?
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |