Radium Fuel Level Indicator Switch Kit for MPFST/FCST (20-0519)
Radium fuel level indicator light and switch kit is compatible with the Radium multi-pump fuel surge tanks (MPFST) and the Radium fuel cell surge tanks (FCST).
Why Do I Need This?
When fuel level drops, a switched signal can be sent to a unit such as a dashboard mounted indicator or programmable ECU input for safety purposes. The level switch is constructed of corrosion resistant stainless steel compatible with all fuel types. It includes 24" long, 20AWG flying leads.
Install Notes:
• Prior to installing, check the direction of the signal on a test bench.
• Switch polarity can easily be reversed by removing the E-clip and flipping the float.
• 1/8" NPT threaded port is required for installing.
• Always apply PTFE thread sealant to tapered pipe threads.
Additional Notes:
• A 2AN ORB (5/16"-24) threaded port is required for installing.
• If stacking on top of the fuel level switch the panel thickness must be 0.75" minimum.
Why Do I Need This?
When fuel level drops, a switched signal can be sent to a unit such as a dashboard mounted indicator or programmable ECU input for safety purposes. The level switch is constructed of corrosion resistant stainless steel compatible with all fuel types. It includes 24" long, 20AWG flying leads.
 |
While often not practical to be viewed while driving, the indicator can be used for diagnosing a potential fueling issue. |
• Prior to installing, check the direction of the signal on a test bench.
• Switch polarity can easily be reversed by removing the E-clip and flipping the float.
• 1/8" NPT threaded port is required for installing.
• Always apply PTFE thread sealant to tapered pipe threads.
Additional Notes:
• A 2AN ORB (5/16"-24) threaded port is required for installing.
• If stacking on top of the fuel level switch the panel thickness must be 0.75" minimum.
See more Radium Products
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |