STM Transmission-Mount Engine Oil Catch Can with 3-Port Valve Cover & Engine Block Breather - Evo 8/9
2003-2006 Mitsubishi Lancer Evolution VIII IX
The STM Transmission-Mount Engine Oil Catch Can is designed to mount right to your 5-speed or 6-speed transmission in the 2003-2006 Evolution VIII-IX. The mounting tabs allow you to re-use the existing transmission bolts and places the catch can right under the intake, out of the way with easy accessibility to the drain plug.
The STM 3-Port Valve Cover & Engine Block Breather design includes everything to properly route the can to the valve cover as well as a vent directly to the crankcase. We include all high quality swivel fittings and braided nylon hose, both STM Valve Cover Fittings for a clean and direct install, and the Engine Block Fitting which is placed on the front side of the engine, behind the turbo.
Please verify that you have enough room behind your turbo to install the Engine Block Fitting and 120° swivel fitting before you purchase and attempt to install.
We include 15 feet of nylon braided line for you to route the install any way you want. The soft nylon also will not scratch paint or other finishes. We suggest a touch of glue or epoxy when installing the STM Valve Cover Fittings. The larger fitting goes in the back side of the valve cover, deleting the PCV valve. The can bolts directly to your transmission using existing bolts, be sure to select the correct transmission when ordering.
As always, if you have any questions regarding your set-up, please feel free to give us a call.
• Mounts Cleanly to the Transmission
• Tig Welded Lightweight Aluminum Body
• High quality -6AN Lines and Fittings
• Easy Access Brass Drain Fitting
• Direct-Fit STM Valve Cover Fittings
STM Products are made in the USA!
Lifetime Warranty on STM Parts to the original purchaser against manufacturing defects.
Gloss Black Powdercoat (+$30)
Wrinkle Black Powdercoat (+$30)
(1) STM Catch Can with Brass Drain Fitting
(2) 5/8" Breather Filters
(5) -6AN 90° Swivel Hose End Fittings
(1) -6AN 120° Swivel Hose End Fitting
(1) -6AN Black Nylon Hose 10 Feet
(1) -6AN Black Nylon Hose 5 Feet
(1) STM Valve Cover Fitting (Side - Thin)
(1) STM Valve Cover Fitting (Rear - Thick)
(1) STM Engine Block Fitting w/ Copper Washer
STM Valve Cover Fittings.
The fitting itself is a very tight fit, but we would definitely recommend a touch of glue or epoxy to help hold it in place in the valve cover upon install. We recommend the ThreeBond Gasket Maker.
© All content is property of STM Tuned Inc
© All images are property of STM Tuned Inc
Recently bought this for my evo build, Great quality and construction, will upload a picture after its back from powdercoat
Cancer and Reproductive Harm