HKS GT-R R35 GT1000 R Type Intercooler
Available for these Applications:
2009+ R35 GT-R VR38DETT
The intercooler is very important for forced induction tuning and HKS has developed new big type for GT1000 full turbine kit.
HKS designed the intercooler for best balance of left-right bank cooling and pipe layout for the same as vertical flow stock design. The core front surface is maximum size as stock type layout. And the thickness of core is 100mm (stock=65mm) which provides less air flow pressure loss for the 1000ps.
HKS designed the intercooler layout design to be installed with the stock air guide (need some work). The air came in from the open bumper is all flowed into the core for the maximum cooling efficiency.
Graph for GT1000 Full Turbine (purple)
- Intercooler Assemblies with Polished Aluminum Piping
- Silicone Hoses
- Clamps and Necessary Hardware.
|Vehicle||Model Year||Type||Core Size・Location (mm)||Type||Remarks|
|GT-R||07/12-||R type INTERCOOLER||390×270×100 (x2)||GT1000SPEC||Need separate piping kit (13002-AN003) Can install to a left‐hand drive car. Not checked for SPEC V.|
Modification of the air duct in front of the stock radiator core support.
Slight bending of the air conditioner pipes.
** This Intercooler kit is designed for OFF-ROAD USE only
** Results based on Japanese specs and testing.
© All content is property of STM Tuned Inc
© All images are property of STM Tuned Inc
Cancer and Reproductive Harm