GSC Power-Division Valves (Exhaust) - 4G63
Fits these Applications:
1992-2006 Mitsubishi Lancer Evolution I-IX
1990-1999 1G & 2G DSM (Eclipse GST/GSX, Talon TSi & Laser Turbo)
When creating their new valve line, GSC set out to create the best performing and longest lasting valves for aftermarket performance. Using advanced 3D design and simulation programs GSC has created a stronger and higher flowing valve head design.
GSC flow tests prototype valve heads in the specific applications to make sure they have the highest flowing valve head available on the market today. With the materials used, GSC has less valve distortion at the face than any of the tested designs.
Less distortion allows for better sealing under extreme conditions and more consistent performance through the life of the valve. GSC Power-Division's new valves are sure to become the industry's standard for sport compact performance valves.
- Swirl polished heads for smoother air flow over the valve.
- Back cut to reduce valve weight for higher rpm, higher boost pressure and allow for more aggressive cam profiles without increasing valve spring seat pressures.
- Valve stems are micropolished to allow for less oil retention on the stem which creates less drag on the stem to guide for a smoother motion.
- Fully nitrated (this includes the 45 which increases valve life and makes a better seal at the valve seat for improved cylinder pressure) also reduces carbon buildup on the backside of the valve.
- Intake valves are a modified 21-4n stainless and Exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity.
- Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear.
- Valve tip lengths. GSC has taken extra time to adjust tip heights on the applications to require less tipping of the valve to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lash.
- GSC has also adjusted the keeper grove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from GSC spring and retainer kits.
- Valves will work with an OEM keeper/lock or when available the GSC upgrade keeper/lock. It's not mandatory but it is suggested that any valve lock not be reused on performance applications do to material grooving.
Super Alloy Exhaust Valves:
For those running high horsepower, high EGT set up's that need a valve that will last in 2000°F conditions. The Super Alloy Exhaust valves have Chrome polished stems to create a smooth, durable finish for added life and better lubricity especially when paired with the GSC Manganese bronze valve guides.
Strength, heat resistance and performance are engineered into every valve. Under head dish is maximized for weight savings while swirl polished and backcut heads promote better air flow without sacrificing durability.
|As per California's Prop65 Laws, we are required to warn you that the products we sell will put you near a vehicle, which emits dangerous chemicals or worse. Please review the link below before purchase.|
Cancer and Reproductive Harm