Girodisc Titanium Brake Pad Shields for Evo 5-X

Girodisc

$90.00 
GIR-TS-1001-4

Quantity: 



We price match!

These Girodisc titanium shims are placed between the back of the brake pads and the pistons to keep heat from transferring into the pistons and fluid. Available for the front and rear Brembo calipers on Evo 5/6/7/8/9 and Evo X. Sold as a set for front or rear. Purchase includes four shields. 1mm thick.

Vehicle Fitment: (Front)
Mitsubishi Evolution 5/6 (with Brembos)
Mitsubishi Evolution 7/8/9 (all)
Mitsubishi Evolution X

Fitment: Part Numbers:
Evo 5-X Front Shields TS-1001
Old/Alternates (D1001, TS-1001-4, TS-1001-5)
Evo 5-X Rear Shields TS-0961
Old/Alternates (TS-0961-4, TS2-007, TS2-0961, TS2-008)
More from Girodisc:
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars.True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid.Here is a comparison of materials and their relative thermal conductivity ratings:

• Titanium 6AL-4V 6.7 W/mk
• Steel 52 W/mk
• Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

See more GiroDisc Products
See more GiroDisc Products
© All content is property of STM Tuned Inc

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
m
marco (Villasanta, 25, IT)
Evo x rs

I put four stars because the plates do not fit perfectly on the stock brembo caliper of the lancer evo x. In my case, if you have new pads and discs, one of the two plates does not fit. This is because they are too thick, you have to wait for the consumption of the pads and discs to insert them. Currently I have only managed to mount one on each side.

K
Kevyywoo (Port of Spain, POS, TT)
Girodisc Titanium Brake Pad Shields

Works magnificent for spirited mountain runs

c
chris genge (Burnaby, BC, CA)
Titanium Brake Pad Shields

Parts are very good quality and fitment


WARNING:
Cancer and Reproductive Harm
www.p65warnings.ca.gov