FP Green Evo IX Turbo

Forced Performance

$1,699.00 
FP-GREEN-JB-EVO9-28

Quantity: 



We price match!

The FP Green with its quick response and hard hitting power curve has long been the go-to turbo for the street crowd not wanting to sacrifice spool. If you want a sneaky, bolt-on turbo that'll break necks but not make you wait, the Green is the turbo for you!

Compatible with these models:
Mitsubishi Evolution IV V VI VII VIII IX

Please review all options before purchase!
There is a lot of information on this page. These turbos are available with the journal bearing or ball bearing CHRA and with either the factory-style, bolt-on Mitsubishi housing or the new stainless FP housing which will need a TiAL MVS wastegate and special downpipe/o2. The MHI housing will work with factory-style o2/downpipe and uses an Evo 9 style actuator. The stock Evo 8 actuator will not work. FP no longer offers the porting options.

Shipping Time: (8-10 Weeks)
FP Turbos are built to your spec. These are not in stock. Typical wait time has been 8-10 weeks.

Compressor Cover:
The FP Green will come with the 84mm Flow Advancement Port Cover Surge Cover. You CAN get a stock-appearing 64mm cover with the MHI housing, but please call us to order that combination.

For Evo 4-8 Install:
The FP Turbos are based on the Evo 9 platform. If you have an Evo 4-8, you'll need the Evo 9 j-pipe and water lines. Please check below for which oil feed line you'll need.
Recommended for install: FP Evo 4-8 Turbo Install Kit.

FP Part Numbers:
2005010, 2005012, 2005014, 2005016, 2005020, 2005022, 2005024, 2005026


What's the difference between the MHI and Stainless Turbine Housing?

FP MHI Housing FP SS Housing

MITSUBISHI HOUSING (MHI)

FP STAINLESS HOUSING (SS)

Bolts to stock exhaust manifold or aftermarket factory-placement manifold with Mitsu flange. Bolts to stock exhaust manifold or aftermarket factory-placement manifold with Mitsu flange.
Fits factory o2 housing and downpipe or any stock placement aftermarket o2 housing and downpipe combo. Does NOT fit with any factory-style o2 housing or downpipe.
Uses Evo 9 Style Internal Wastegate.
(Available with purchase.)
Uses TiAL MVS External Wastegate.
(Not included.)
Recommended Options for Install:

STM O2/Downpipe Recirculated

STM O2/Downpipe with Atmosphere Dump

Invidia O2 Housing
Recommended Options for Install:

STM O2/Downpipe Recirculated

STM O2/Downpipe with Atmosphere Dump

FP Cast O2 Housing
Manifold Gasket (Not Included)

OEM Gasket

STM Stainless Gasket
Manifold Gasket (Not Included)

FP Gasket for Stainless Housing
 
 


What's the difference between Journal Bearing and Ball Bearing?

FP MHI Housing

FP Green:

Journal Bearing:

Ball Bearing:

CHRA: FP Journal Bearing Xona Rotor Dual Ceramic BB
Oil Line: NOT Included. Required for Install.
NOT compatible with stock feed lines.
NEW FP JB Feed Line is (Available HERE.)
NOT Included.
Compatible with stock feed lines!
(Optional) NEW FP SS Feed Line is (Available HERE.)
Compressor Wheel: 73HTZ 73HTZ
Flow Rating: 57 lb Per Minute 57 lb Per Minute
Compressor Wheel Inducer: 52.6mm 52.6mm
Compressor Wheel Exducer: 73mm 73mm
Turbine Wheel Inducer: 67.3mm 67.3mm
Turbine Wheel Exducer: 58.8mm 58.8mm
Compressor Housing: 84mm Flow Advancement Port Cover 84mm Flow Advancement Port Cover


Black Ceramic Coating (+$100):

FP Black Ceramic Coating
You can have your MHI or Stainless housing treated with a black ceramic coating to help keep the heat in, keeping your engine bay cooler and it will look amazing!

See more Forced Performance Products
See more Forced Performance Products
© All content is property of STM Tuned Inc

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

WARNING:
Cancer and Reproductive Harm
www.p65warnings.ca.gov