AMS Alpha Performance Nissan R35 GT-R Fuel Cooler

AMS

$1,399.95 
AMS-ALP.07.07.0102-08

Fits these Applications:
2009-2016 Nissan R35 GT-R

 

Keeping your fuel cool is important. If you run your GT-R in warm climates, run track events or own a GT-R with power upgrades, the Alpha Performance R35 GT-R Fuel Cooler is a must-have safety feature that will significantly reduce the chance of damaging your fuel pumps or worse – your engine!
 
It uses your AC system to cool the fuel temperature.  It’s simple to install and use – recirculating fuel from the fuel tank to the cooler and back again so that your fuel supply remains cool.  Outside of a quality tune, it’s quite possibly one of the best engine safety component you can install to keep your modified or non-modified GT-R running safely throughout some of the hottest weather conditions. 

The AMS Engineers tested fuel flow characteristics in an effort to solve the fuel overheating problem of the R35 GT-R.  As fuel is pressurized by your fuel pump, it heats up from being compressed to as high as 100psi!  This has proven to be an issue with the GTR, especially with aftermarket fuel pumps installed. The larger the fuel pump and/or the less efficient it is, the more the fuel heats up.  
 
In AMS testing, just flowing some of the less efficient larger pumps even without the engine running was enough to get the fuel very warm!  The fuel tank also sits above the heat-soaked GR6 transmission and exhaust. Couple this together with hot weather or a high performance aftermarket fuel system, temps can get hot enough to boil fuel at the fuel pickup! In this case, the lower pressure at the pump inlet, combined with the hot fuel will lower the boiling point of fuel and cavitation can occur.  When fuel boils, the pumps stop flowing – cutting off fuel supply to the engine.  The cavitation at the pump inlet is also very damaging – it can ruin your expensive upgraded fuel pumps.

It Can Also Destroy Your GT-R Engine
If you’re lucky the lean condition will be quick and abrupt enough to cause a lean misfire and incomplete combustion.  Worst case scenario, the lean condition can run long enough to cause detonation or extreme combustion temperatures that can melt engine components.

Features:

  • Reduces overall fuel temperature
  • Helps prevent overheating and damage of fuel pump(s)
  • Lessens the possibility of detonation or running lean
  • Helps prevent damage to the engine from overheating

Includes:

  • OEM quality fuel cooler unit
  • Alpha CNC aluminum anodized mounting bracket
  • Fuel feed line
  • Fuel return line
  • AC hard line
  • AC soft line
  • All necessary hardware and fasteners to complete installation

STM Boost Reward Points Earn 1% back on all website purchases! Sign up today!

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

As per California's Prop65 Laws, we are required to warn you that the products we sell will put you near a vehicle, which emits dangerous chemicals or worse. Please review the link below before purchase.
WARNING:
Cancer and Reproductive Harm
www.p65warnings.ca.gov